ModPro Shelf

Not everything in your shop needs a custom holder. Sometimes you just need a flat surface to set something on. Your welding helmet. A parts box. A notebook. Your coffee (let's be real, that's probably the most important one). Maybe a Bluetooth speaker so you can argue with your coworker about whose playlist is worse.

The point is, it's a shelf. You already know what to do with it.

But just because it's simple doesn't mean we phoned it in.

Upper and Lower Configurations

The ModPro Shelf comes in two gusset configurations, and which one you pick depends on where you're putting it and how you want it to work.

Upper mount: The support gussets angle downward, which is what you need when you're mounting near the top of your ModPro wall. The gussets drop into the slots below the shelf, keeping the surface completely clear and unobstructed. The front edge has a downward-facing lip with laser cut holes for attaching trim pieces to create a retaining edge, dress up the look, or whatever creative application you come up with.

That front lip is also a perfect spot for magnetic clips to hold work orders, notes, or job sheets, like your own personal order window. Stick a few magnets on there and you've got an instant reference board right above your workspace.

Lower mount: The gussets angle upward, acting like bookends to keep things from sliding off the sides. The front edge is completely flat with no lip, so nothing interferes with sliding items on and off the shelf. Use lower mounts near the bottom of the wall, or anywhere you want that side containment.

Build a Seamless Shelf as Wide as You Want

Here's where it gets good. Upper mount shelves can be placed directly side by side with the gussets of two neighboring units sharing a single slot. The result is one continuous, seamless shelf surface with no gaps and no dividers. Want a 56" shelf? Put two 28" units next to each other. Need a full-width landing zone across your entire ModPro wall? Keep going. There's no limit.

Three Widths

• 8": Compact. Perfect for a small parts bin, a phone, or yes, your coffee.
• 18": The workhorse. Room for a portable welder, a tool tray, or a stack of whatever needs to live at arm's reach.
• 28": The full spread. A serious landing zone on its own, or combine multiples for an even bigger surface.

Laser Cut Steel, Not Stamped Tin

Like everything in the ModPro line, these shelves are laser cut from steel and powder coated to match your panels and cabinets. They don't sag under real weight. They don't flex when you set a heavy tool down. They feel like they're part of the wall, because they are.

Part of the ModPro Modular Wall System

Slides into any ModPro panel or slotted surface using the standard ModPro mount. Move it up, move it down, swap it out, add more. A ModPro rail and panel system is required.