Weld Table Accessories
In order to better organize a whole lot of products, we’ve broken down the products that work with our welding tables into two main groups – ACCESSORIES and FIXTURES.
Our ACCESSORIES listing features products that are generally portable and could be moved around the shop and between tables continuously. Our FIXTURES listing features things that generally bolt to a table. We’ve created a few subcategories to quickly help you find the right products.
To customize your table, check out our: BASE SHELVES, DRAWERS, EXTENSIONS, and REMOVEABLE COVERS.
For fixturing and productivity, check out our: RISER BLOCKS, FAB SQUARES, and SUPER SLOT ACCESSORIES.
Make sure and check out each category to get everything you need! And contact us if you’re looking for something that isn’t listed. Chances are, we have it but it just isn’t on the website yet!
-
Fabrication Table Magnetic Rest Button
$4.50 Add to cartMagnets on the bottom of the Magnetic Rest Buttons allow the button to be used at ANY point on the tabletop to elevate workpieces. This part elevates to 0.45 inch.
-
BuildPro Stop
$4.75 Add to cartThis stop can be used wherever parts need to be positively located for clamping. Press fit shank can be inserted in any 5/8-in holes on our tabletop. We offer the 1.5″ tall stop, since it’s by far the most popular with our customers.
-
6.5 Inch BuildPro Inserta Clamps
$20.00 Add to cartPlace the Inserta Clamps into the 5/8″ holes on our table tops for fast, easy clamping. Clamp in the vertical or horizontal position at any height.
-
BuildPro Side Clamp
$17.00 Add to cartInsert into our welding table holes for low profile, light duty, horizontal clamping, locating, and stopping.
-
Sliding Stop – 2.5″ Travel
$6.00 Add to cartMade from 1/4″ A36″ steel, this sliding stop is made for ultimate flexibility. With 2.5″ of travel, this stop knows no boundaries. Swivel 360 degrees and adjust for the perfect hold! Our Sliding Stop -3″ Travel measures 4.2″ x 2″ x 2″ and weighs 0.66 pounds.
-
BuildPro Inserta Pliers – 4″ Opening
$22.00 Add to cartInsert these pliers into any hole on our tabletops for fast clamping. The rear crank handle allows pressure adjustment while the clamp is in locked position.
-
Fabrication Table 1/2″ Threaded Adapters
$7.80 Add to cartConvert any hole in the table into a 1/2″x 13 threaded hole. Place the Adapter in position beneath the tabletop, in alignment with table holes. Magnets hold threaded adapter in place so you can thread bolts right through from the top of the table!
-
8.5 Inch BuildPro Inserta Clamps
$29.00 Add to cartOur InsertaClamps will hold down anything you can imagine on any welding table with standard 16mm or 5/8″ fixture holes. Choose from either this 8.5″ version, or the smaller 6.5″ variant depending on the height and strength requirements of your project.
-
Welding Fab Table V – Block
$15.50 Add to cartIf you’re working with round tubing or other curved materials, V-Blocks will help facilitate clamping them directly to our fabrication tables for welding and fixturing. The “V” shape allows you to drop in tubing within a range of diameters, and then clamp down with tools like our Inserta Clamps.
-
Variable Height Edge Stop
$17.99 Add to cartOur variable height edge stop is designed to mount on the edge of any of our fabrication tables to give you a positive and extremely strong stop to push material against. It also offers two additional holes to accept tooling or to use for creative fixturing!
-
Welding Fab Table V – Pad (for 6.5″ Inserta Clamps)
$8.90 Add to cartFor Use With 6.5″ Inserta Clamps Only: If you’re working with round tubing or other curved materials, V-Blocks will help facilitate clamping them directly to our fabrication tables for welding and fixturing. The “V” shape allows you to drop in tubing within a range of diameters, and then clamp down with tools like our Inserta Clamps.
-
10″ Combo Accessory Tool Holder
$29.99 Add to cartBecause you don’t have time to look for lost tools, we’ve created the Combo Accessory Tool Holder. Our 10″ x 7″ tool holder offers plenty of space for hanging clamps/pliers and comes with a top-shelf with five 5/8″ precision-cut holes for extra tooling like Stops and Side Clamps.
-
Practice Weld Diamond
$20.00 Add to cartOur Practice Weld Diamond is the ultimate kit to test your skills while building something worth keeping. Practice your fit-up detail, tacking, outside corner welding and grinding all in one.
-
Sliding Stop – 4″ Travel
$8.00 Add to cartMade from 1/4″ A36″ steel, this sliding stop is made for ultimate flexibility. With 4″ of travel, this stop knows no boundaries. Swivel 360 degrees and adjust for the perfect hold! Our Sliding Stop -4″ Travel measures 5.7″ x 2″ x 2″ and weighs 0.81 pounds.
-
Welding Table Accessory Plates – 8″
$36.99 Add to cartAccessory plates allow for the creation of custom fixtures for our welding tables.
-
Welding Fab Table V – Pad (for 8.5″ Inserta Clamps)
$8.90 Add to cartFor Use With 8.5″ Inserta Clamps Only: If you’re working with round tubing or other curved materials, V-Blocks will help facilitate clamping them directly to our fabrication tables for welding and fixturing. The “V” shape allows you to drop in tubing within a range of diameters, and then clamp down with tools like our Inserta Clamps.
-
Adjust-O ON / OFF Magnet Square Small
$46.50 Add to cartFast & easy way to hold metal work pieces at 45 Degree & 90 Degree. With the magnetic switch you can Turn the magnet off when setting up, and turn it on when you’re ready to work. Fast and safe set-up!
-
Welding Table Starter Accessory Pack
$697.99 Add to cartA great starter pack with all the basic tools needed to start building your next project! Inside, you’ll find the following tools: Eight (8) x 6.5” Inserta Clamps, Eight (8) x Table Stops, Four (4) x Side Clamps, Four (4) x Sliding Stop 2.5” Travel, Four (4) x Variable Height Edge Stop, Eight (8) x Magnetic Rest Button, Four (4) x ½” Threaded Adapters, Two (2) x 10” Combo Accessory Tool Holder, and Two (2) x Welding Table Fab Square – 10” x 10” x 4”!
-
10″ Accessory Tool Holder
$19.99 Add to cartEveryone needs a safe and convenient spot to hold their tools and clamps, so we created these bolt on hangers which conveniently keep everything handy!
-
Sliding Stop – 6″ Travel
$10.00 Add to cartMade from 1/4″ A36″ steel, this sliding stop is made for ultimate flexibility. With 6″ of travel, this stop knows no boundaries. Swivel 360 degrees and adjust for the perfect hold! Our Sliding Stop -6″ Travel measures 7.7″ x 2″ x 2″ and weighs 1 pound.
-
2-Axis Fixture Vise 2.45″ T-Clearance (WAC34)
$110.00 Add to cartMade with machined cast iron. Featuring these improvements:
- Machined outside faces – usable for upright joint
- Stand-off increases access
- Quick acting screw on deluxe models.
-
Welding Table 20” Right Angle Hanger Accessory
$49.99 Add to cartUse it as a stop or hang your tools on this great new versatile tool. We almost named it “The Thing!” because our 20″ x 2.5″ x 2.5″ right angle hanger is fabricated from 1/4″ thick A36 structural steel, bent to a perfect 90 degree angle, and can do way more than just hang your accessories!
-
Welding Table Pro Accessory Pack
$2,197.99 Add to cartFor the professional or those wanting a robust collection of fabricating tools, our Pro Pack won’t disappoint. This pack comes with Ten (10) x 6.5” Inserta Clamps, Ten (10) x 8.5” Inserta Clamps, Six (6) x Inserta Pliers – 4’ Opening, Ten (10) x Table Stops, Ten (10) x Side Clamps, Sixteen (16) x Sliding Stop 2.5” Travel, Four (4) x Variable Height Edge Stop, Sixteen (16) x Magnetic Rest Button, Eight (8) x ½” Threaded Adapters, Four (4) x 10” Combo Accessory Tool Holder, Four (4) x Welding Table Fab Square – 14” x 14” x 4”, Ten (10) x V-Block, Ten (10) x V – Pad (for 6.5″ Inserta Clamps), One (1) x 10” x 10” Vise Mount, and Two (2) x 8” Welding Accessory Plates
-
3-Axis Fixture Vise 3.75″ T-Clearance (WAC35-SW)
$282.00 Add to cartFeatures the Quick Acting Screws and “Swing Away” Arm.
Hold parts in position during cool down to minimize distortion due to contraction.
- Two Quick Acting Screws.
- “swing away” the 3rd Axis arm for quick and easy part removal.
- 3.75″ Miter Joints Capacity also available in a 5″ . The 5″ comes with a curved arm for greater workpiece clearance.
-
2-Axis Fixture Vise 3.75″ T-Clearance (WAC35-D)
$132.00 Add to cartThis Strong Hand Welders Clamp is constructed from heavy cast iron with a machined base and jaw to provide a firm hold. Designed to be bench mounted or used freely around the shop, this clamp is extremely durable for years of use.
-
Welding Table Advanced Accessory Pack
$1,476.99 Add to cartMore complex jobs require a greater assortment of tools. You’ll find this pack comes with the following tools: Eight (8) x 6.5” Inserta Clamps, Eight (8) x 8.5” Inserta Clamps, Four (4) x Inserta Pliers – 4’ Opening, Ten (10) x Table Stops, Ten (10) x Side Clamps, Eight (8) x Sliding Stop 2.5” Travel, Four (4) x Variable Height Edge Stop, Sixteen (16) x Magnetic Rest Button, Four (4) x ½” Threaded Adapters, Four (4) x 10” Combo Accessory Tool Holder, and Four (4) x Welding Table Fab Square – 12” x 12” x 4”!
-
Welding Table Accessory Plates – 5 5/8″
$18.99 Add to cartAccessory plates allow for the creation of custom fixtures for our welding tables.
-
Beveled Twisted Knot Wire Wheel 5in
$6.49 – $45.00 Select optionsIf you’ve never tried a 5in wheel they offer a LOT more power than a 4.5in wheel and last a lot longer. The bevel allows the twisted knots to angle downward a bit which makes it much more effective!
Even better, in the 10-pack these babies are only $4.50 each! That’s less than half the price you’ll pay anywhere else! 🙂
-
Welding Table Accessory Handle – 30″ (Gen 2)
$50.00 Add to cartTake advantage of our heavy duty table’s mobility and add our custom-built handle to your 30″ x 40″ or 30″ x 60″ welding tables.
-
Welding Table Accessory Plates – 3 5/8″
$12.99 Add to cartAccessory plates allow for the creation of custom fixtures for our welding tables.
-
5″ x 2″ Total Lock Casters (Set of Two Swivel Casters)
$79.99 Add to cartThis Heavy Duty caster set includes 2 casters to get your heaviest projects rolling! This 5″ x 2″ Total Lock Caster Set includes:
- 2 Total Lock Swivel Casters
- Black Polyurethane on Black Steel Wheel
- 800 lbs Capacity per caster
-
Welding Table Axle Stand for Fab Tables
$219.99 Add to cartOur Table Top Axle Stand bolts right onto any of our welding and fabrication tables to allow you to tear down or build up any size axle.
-
Welding Table Accessory Plates – 12″
$59.99 Add to cartAccessory plates allow for the creation of custom fixtures for our welding tables.
-
Welding Table Accessory Handle – 50″ (Gen 2)
$50.00 Add to cartTake advantage of our heavy duty table’s mobility and add our custom-built handle to your 50″ x 50″ and 50″ x 100″ welding tables.
-
Self-Leveling Feet (4 Pack for 5″ Casters)
$239.00 Add to cartNo need to choose between Casters and Leveling Feet, when you can have both! Our 4 Pack of Self-Leveling Feet bolt-on to the standard cross bracing with our weld table legs and casters. Designed for our 40″ x 80″ tables and smaller, this 4 Pack installs as simple as drilling two holes and installing two bolts.
-
Welding Table Accessory Handle – 40″ (Gen 2)
$50.00 Add to cartTake advantage of our heavy duty table’s mobility and add our custom-built handle to your 40″ x 40″ and 40″ x 80″ welding tables.
-
2-Axis Fixture Vise 1.85″ T-Clearance (WAC22)
$92.00 Add to cartMade with machined cast iron. Featuring these improvements:
- Machined outside faces – usable for upright joint
- Stand-off increases access
- Quick acting screw on deluxe models.
-
Welding Table Lifting Hooks (Set of 4)
$19.99 Add to cartThe perfect Lifting Hook for transporting our tables. Made from 1/4″ thick steel to give you peace of mind when lifting.
-
Welding Table Accessory Handle – 6″ Stubby
$35.99 Add to cartTry the “Stubby”. Double up for dual handles on larger tables or use this handle on our smaller width tables sandwiched between other fixtures.
