What Tools Are Included
One of the most common questions we hear when someone purchases a new welding and fixturing table is, ‘What tools should I get?’ To make that decision easier, we’ve created several tool packages designed to suit a variety of needs and budgets—each one packed with essential tools to help you take on any project.
Check out these links and find the perfect package for you: Starter, Advanced, and Ultimate Accessory Packs. We’ve also curated two packs for teaching institutions: Student Edition & Instructor Edition. And, since everyone loves our ball lock tools, here’s our Ball Lock Add-On Pack you can configure as you like!
What You Get!
Student Edition Package
- 12 x T-Handle Clamps
- 8 x Stop Pins
- 8 x Side Clamps w/ Knurled Handles
- 4 x Variable Height Edge Stop
- 16 x TMW 1/2″ Thread Block
- 20 x TMW Mag Block
- 8 x 2.5″ Travel Sliding Stops
- 4 x 10” Super Squares
- 2 x 10″ Combo Accessory Tool Holder
- 1 x Welding Table 20” Right Angle Hanger Accessory
Why You Get It!
T-Handle Clamps
We consider our Clamps with T-handles the single most important accessory for our fabrication tables. These clamps can drop in any hole on our table or other fixtures and quickly clamp down with hundreds of pounds of holding force.
Stops and Side Clamps w/ Knurled Handles
It’s one thing to be able to clamp things downward to the table, but it’s another thing to be able to position things accurately and clamp them sideways. This is where the stops and side clamps come in. So let’s say you want to build a frame that’s almost as big as your table surface. You can use the side stops to push your material right up to the edge.
So let’s say you want to build a frame that’s almost as big as your table surface. You can use the Variable Height Stops to push your material right up to the edge.
Meanwhile, on the other side you need to be able to push things together firmly to keep it in place, so that’s where the Side Clamps come in.
Sometimes your materials don’t fit conveniently between our precision holes and other stops just don’t work. Enter our Sliding Stops. Position them where you need ’em and they will hold!
1/2″ Threaded Adapters
Convert any hole in the table into a 1/2″x 13 threaded hole. Place the Adapter in position beneath the tabletop, in alignment with the table holes. Magnets hold threaded adapter in place so you can thread bolts right through from the top of the table!
Mag Block – Magnetic Rests
The magnetic rest buttons do two very critical things:
- They raise your work piece up by about a half inch (or more if you stack them), allowing you to actually fully weld seams all the way down without risking welding your project to the table!
- They allow for some critical space for weld BB’s to cool down before hitting the table surface, which prevents a lot of them from sticking.
For even more protection for your table top we recommend spraying Anti-Spatter directly on the table surface before welding over it! Between that and the rest buttons virtually nothing will stick to your beautiful table!
10″ Combo Accessory Tool Holder
Because you don’t have time to look for lost tools, we’ve created the Combo Accessory Tool Holder. Our 10″ x 7″ tool holder offers plenty of space for hanging clamps/pliers and comes with a top-shelf with five 5/8″ precision-cut holes for extra tooling.
Welding Table Fab Squares
The 10″ Fab Squares do exactly what you would expect them too. Allow you to fixture upwards at a perfect 90 degree angle, meaning you can reliably and consistently fixture in three dimensions!
Welding Table 20” Right Angle Hanger Accessory
So that’s what’s included in our Student Edition Accessory Pack! We believe these tools are essential for students learning to fixture, weld and fabricate!
