What Tools Are Included
One of the most common questions we hear when someone purchases a new welding and fixturing table is, ‘What tools should I get?’ To make that decision easier, we’ve created several tool packages designed to suit a variety of needs and budgets—each one packed with essential tools to help you take on any project.
Check out these links and find the perfect package for you: Starter, Advanced, and Ultimate Accessory Packs. We’ve also curated two packs for teaching institutions: Student Edition & Instructor Edition. And, since everyone loves our ball lock tools, here’s our Ball Lock Add-On Pack you can configure as you like!
What You Get!
Instructor Edition Accessory Pack
- Eight (8) x T-Handle Clamps
- Eight (8) x Stop Pins
- Eight (8) x 2.5” Travel Sliding Stops
- Four (4) x Variable Height Edge Stop
- Eight (8) x Side Clamps w/ Knurled Handles
- Sixteen (16) x TMW 1/2″ Thread Blocks
- Twenty (20) x TMW Mag Blocks
- Sixteen (16) x Steel V-Blocks
- Twenty (20) x Ball Lock Pins (5/8)
- Four (4) x 10″ Super Squares
- Twenty (20) – 1/2″ x 1.5″ Hex Bolts w/ nuts and washers
- Two (2) x 10″ Combo Accessory Tool Holder
- One (1) x Welding Table 20” Right Angle Hanger Accessory
- Two (2) x Welding Table Lifting Hooks (Set of 4)
- Two (2) x Welding Table Fab Square – 25″ x 10″ x 4″
- Two (2) x Welding Table Riser – 6″ x 6″ x 20″
- Two (2) x Welding Table Extension – 10″ X 10″ Vise Mounts
Why You Get It!
T-Handle Clamps
We consider our Clamps w/ T-Handles the single most important accessory for our fabrication tables. These clamps can drop in any hole on our table or other fixtures, and quickly clamp down with hundreds of pounds of holding force.
Stops and Side Clamps w/ Knurled Handles
It’s one thing to be able to clamp things downward to the table, but it’s another thing to be able to position things accurately and clamp them sideways. This is where the stops and side clamps come in. So let’s say you want to build a frame that’s almost as big as your table surface. You can use the side stops to push your material right up to the edge.
So let’s say you want to build a frame that’s almost as big as your table surface. You can use the Variable Height Stops to push your material right up to the edge.
Meanwhile, on the other side you need to be able to push things together firmly to keep it in place, so that’s where the Side Clamps come in.
Sometimes your materials don’t fit conveniently between our precision holes and other stops just don’t work. Enter our Sliding Stops. Position them where you need ’em and they will hold!
Mag Block – Magnetic Rest
The magnetic rest buttons do two very critical things:
- They raise your work piece up by about a half inch (or more if you stack them), allowing you to actually fully weld seams all the way down without risking welding your project to the table!
- They allow for some critical space for weld BB’s to cool down before hitting the table surface, which prevents a lot of them from sticking.
For even more protection for your table top we recommend spraying Anti-Spatter directly on the table surface before welding over it! Between that and the rest buttons virtually nothing will stick to your beautiful table!
1/2″ Threaded Adapter
Convert any hole in the table into a 1/2″x 13 threaded hole. Place the adapter beneath the tabletop in alignment with table holes. Magnets hold threaded adapter in place so you can thread bolts right through from the top of the table!
For use underneath, inside or anywhere you need quick bolting access
Steel V-Blocks
Hold round parts in place with our 120° V-block, made from black-oxidized, hardened tool steel. Perfect for both vertical or horizontal use, this tool holds while our Clamps push! Measuring: 50x50mmx16mm.
Ball Lock Pins (5/8)
Save time and effort with this quick-locking fastener. Simply drop in any 16mm (5/8″) hole and tighten. No more reaching under the table to thread a bolt! Time-saving Ball Lock Pin secures fixtures, tooling, and more. Measuring: 5/8″-5/8″(16x16mm).
10″ Super Square
Our 10″ Super Squares are extremely precise, fully machined tools to help you achieve 45 and 90 degree angles for all of your projects. They can be bolted directly to our fabrication tables, and parts can be clamped onto multiple sides simultaneously to achieve perfect results, even along multiple axis! This is the most essential tool in a fabricator’s arsenal, and we believe everyone should have at least 4.
1/2″ x 1.5″ Hex Bolts w/ Nuts and Washers
10″ Combo Accessory Tool Holder
Because you don’t have time to look for lost tools, we’ve created the Combo Accessory Tool Holder. Our 10″ x 7″ tool holder offers plenty of space for hanging clamps/pliers and comes with a top-shelf with five 5/8″ precision-cut holes for extra tooling.
Welding Table 20” Right Angle Hanger Accessory
Welding Table Lifting Hooks (Set of 4)
Welding Table Fab Square – 25″ x 10″ x 4″
Welding Table Riser – 6″ x 6″ x 20″
Welding Table 10″ X 10″ Vise Mount × 1
Our bolt-on vise mount adds a 10″ x 10″ extension that lets you securely mount almost any vise and really leverage it!
