Description
Our weld table covers are laser cut from heavy 10 gauge (1/8″) steel, and each section has a 1″ x 1/2″ threaded rod plug welded to the corners. These removable cover plates come in multiple sections to allow for full or partial table coverage. You configure coverage as needed and bolt the covers down if you desire!
Some people might argue that 10 gauge steel is too thick! But we say NONSENSE! You don’t want a flimsy little piece of metal sitting on the table warping in all directions, so we use the good stuff to make sure it lays flat, even when you don’t bolt it tight!
These covers were born from multiple requests from customers who typically wanted to cover a portion of the table when they aren’t bolting things down in order to keep small parts from dropping through holes while working on detailed projects. So we made sure the coverage is modular.
For our 40″ x 40″ table, we provide two 20″ x 40″ solid 10-gauge cover panels.
Note: We have sizes for each of our tables: 30″ x 30″ – Single panel | 30″ x 48″- Two 15″ x 48″ panels | 40″ x 40″ – Two 20″ x 40″ panels | 50″ x 50″ – Two 25″ x 50″ panels | 60″ x 60″ – Three 20″ x 60″ panels | 30″ x 60″ – Two 30″ x 30″ panels | 40″ x 80″ – Four 20″ x 40″ panels | 50″ x 100″ – Five 20″ x 50″ panels | 60″ x 100″ – Five 20″ x 60″ panels | 60″ x 120″ – Six 20″ x 60″ panels
