Welding Table Accessories
-
Fabrication Table Magnetic Rest Button
$4.25 Add to cartMagnets on the bottom of the Magnetic Rest Buttons allow the button to be used at ANY point on the tabletop to elevate workpieces. This part elevates to 0.45 inch.
-
BuildPro Stop
$4.75 Add to cartThis stop can be used wherever parts need to be positively located for clamping. Press fit shank can be inserted in any 5/8-in holes on our tabletop. We offer the 1.5″ tall stop, since it’s by far the most popular with our customers.
-
6.5 Inch BuildPro Inserta Clamps
$19.00 Add to cartPlace the Inserta Clamps into the 5/8″ holes on our table tops for fast, easy clamping. Clamp in the vertical or horizontal position at any height.
-
BuildPro Side Clamp
$16.00 Add to cartInsert into our welding table holes for low profile, light duty, horizontal clamping, locating, and stopping.
-
Sliding Stop – 2.5″ Travel
$6.00 Add to cartMade from 1/4″ A36″ steel, this sliding stop is made for ultimate flexibility. With 2.5″ of travel, this stop knows no boundaries. Swivel 360 degrees and adjust for the perfect hold! Our Sliding Stop -3″ Travel measures 4.2″ x 2″ x 2″ and weighs 0.66 pounds.
-
BuildPro Inserta Pliers – 4″ Opening
$21.00 Add to cartInsert these pliers into any hole on our tabletops for fast clamping. The rear crank handle allows pressure adjustment while the clamp is in locked position.
-
Fabrication Table 1/2″ Threaded Adapters
$7.50 Add to cartConvert any hole in the table into a 1/2″x 13 threaded hole. Place the Adapter in position beneath the tabletop, in alignment with table holes. Magnets hold threaded adapter in place so you can thread bolts right through from the top of the table!
-
8.5 Inch BuildPro Inserta Clamps
$27.50 Add to cartOur InsertaClamps will hold down anything you can imagine on any welding table with standard 16mm or 5/8″ fixture holes. Choose from either this 8.5″ version, or the smaller 6.5″ variant depending on the height and strength requirements of your project.
-
Welding Fab Table V – Block
$14.50 Add to cartIf you’re working with round tubing or other curved materials, V-Blocks will help facilitate clamping them directly to our fabrication tables for welding and fixturing. The “V” shape allows you to drop in tubing within a range of diameters, and then clamp down with tools like our Inserta Clamps.
-
Welding Fab Table V – Pad (for 6.5″ Inserta Clamps)
$8.50 Add to cartFor Use With 6.5″ Inserta Clamps Only: If you’re working with round tubing or other curved materials, V-Blocks will help facilitate clamping them directly to our fabrication tables for welding and fixturing. The “V” shape allows you to drop in tubing within a range of diameters, and then clamp down with tools like our Inserta Clamps.
-
Super Slot Grinder Hanger
$15.00 Add to cartOur Super Slot Grinder Hanger adds storage to our 2nd generation tables and our Super Slot Panels.
-
Sliding Stop – 4″ Travel
$8.00 Add to cartMade from 1/4″ A36″ steel, this sliding stop is made for ultimate flexibility. With 4″ of travel, this stop knows no boundaries. Swivel 360 degrees and adjust for the perfect hold! Our Sliding Stop -4″ Travel measures 5.7″ x 2″ x 2″ and weighs 0.81 pounds.
-
Welding Fab Table V – Pad (for 8.5″ Inserta Clamps)
$8.50 Add to cartFor Use With 8.5″ Inserta Clamps Only: If you’re working with round tubing or other curved materials, V-Blocks will help facilitate clamping them directly to our fabrication tables for welding and fixturing. The “V” shape allows you to drop in tubing within a range of diameters, and then clamp down with tools like our Inserta Clamps.
-
Adjust-O ON / OFF Magnet Square Small
$44.50 Add to cartFast & easy way to hold metal work pieces at 45 Degree & 90 Degree. With the magnetic switch you can Turn the magnet off when setting up, and turn it on when you’re ready to work. Fast and safe set-up!
-
10″ Accessory Tool Holder
$19.99 Add to cartEveryone needs a safe and convenient spot to hold their tools and clamps, so we created these bolt on hangers which conveniently keep everything handy!
-
Sliding Stop – 6″ Travel
$10.00 Add to cartMade from 1/4″ A36″ steel, this sliding stop is made for ultimate flexibility. With 6″ of travel, this stop knows no boundaries. Swivel 360 degrees and adjust for the perfect hold! Our Sliding Stop -6″ Travel measures 7.7″ x 2″ x 2″ and weighs 1 pound.
-
Beveled Twisted Knot Wire Wheel 5in
$6.49 – $45.00 Select optionsIf you’ve never tried a 5in wheel they offer a LOT more power than a 4.5in wheel and last a lot longer. The bevel allows the twisted knots to angle downward a bit which makes it much more effective!
Even better, in the 10-pack these babies are only $4.50 each! That’s less than half the price you’ll pay anywhere else! 🙂
-
Welding Table Axle Stand for Fab Tables
$219.99 Add to cartOur Table Top Axle Stand bolts right onto any of our welding and fabrication tables to allow you to tear down or build up any size axle.
