What Tools Are Included
One of the most common questions we hear when someone purchases a new welding and fixturing table is, ‘What tools should I get?’ To make that decision easier, we’ve created several tool packages designed to suit a variety of needs and budgets—each one packed with essential tools to help you take on any project.
Check out these links and find the perfect package for you: Starter, Advanced, and Ultimate Accessory Packs. We’ve also curated two packs for teaching institutions: Student Edition & Instructor Edition. And, since everyone loves our ball lock tools, here’s our Ball Lock Add-On Pack you can configure as you like!
Pro Accessory Pack: You’re tackling complex, everchanging projects and need an accessory pack that won’t leave you hanging. This package has all the critical accessories and a few fixtures to integrate your existing tools into the mix (and we’ve included a good discount when purchased in this kit!).
What You Get!
- Twenty (20) x T-Handle Clamps
- Ten (10) x Ratchet Handle Clamps
- Ten (10) x 5” Jaw Plier Clamps
- Ten (10) x Stop Pins
- Ten (10) x Side Clamps w/ Knurled Handles
- Twenty (20) x ½” Thread Blocks
- Twenty (20) x Mag Blocks
- Eight (8) x Variable Height Edge Stops
- Eight (8) x 10″ Super Squares
- Four (4) x 10” Combo Accessory Tool Holders
- One (1) x 10” x 10” Vise Mount
- Two (2) x 8” Accessory Plates
- Ten (10) x 2.5” Travel Sliding Stops
- Ten (10) x 4” Travel Sliding Stops
- Ten (10) x 6” Travel Sliding Stops
- Four (4) x Table Risers – 4” x 4” x 8”
- Four (4) x Special Fab Squares – 20” x 4” x 2”
Why You Get It!
Clamps
Our T-Handle Clamps, Ratchet Handle Clamps and 5″ Jaw Plier Clamps) are absolutely critical for the Ultimate Pack of tooling. These assorted clamps can drop into any hole on our table or other fixtures and quickly clamp down with hundreds of pounds of holding force.
Mag Block – Magnetic Rest
The magnetic rest buttons do two very critical things:
- They raise your work piece up by about a half inch (or more if you stack them), allowing you to actually fully weld seams all the way down without risking welding your project to the table!
- They allow for some critical space for weld BB’s to cool down before hitting the table surface, which prevents a lot of them from sticking.
For even more protection for your table top we recommend spraying Anti-Spatter directly on the table surface before welding over it! Between that and the rest buttons virtually nothing will stick to your beautiful table!
1/2″ Threaded Adapter
Convert any hole in the table into a 1/2″x 13 threaded hole. Place the adapter beneath the tabletop in alignment with table holes. Magnets hold threaded adapter in place so you can thread bolts right through from the top of the table!
For use underneath, inside or anywhere you need quick bolting access
Stops & Side Clamps
It’s one thing to clamp things downward to the table, but it’s another to position them accurately and clamp them sideways. This is where the stops and side clamps come in. We’ve included several to keep your materials exactly where you want them: Stops, Side Clamps, Variable-Height Edge Stops, and Sliding Stops. Each has its function.
Stops are the fastest way to create borders, so drop them on one side of your material and push against them from the opposite side!
Meanwhile, on the other side you need to be able to push things together firmly to keep it in place, so that’s where the Side Clamps w/ Knurled Handles come in.
So let’s say you want to build a frame that’s almost as big as your table surface. You can use the Variable Height Stops to push your material right up to the edge.
Sometimes your materials don’t fit conveniently between our precision holes and other stops just don’t work. Enter our Sliding Stops. Position them where you need ’em and they will hold!
10″ Super Square
Our 10″ Super Squares are extremely precise, fully machined tools to help you achieve 45 and 90 degree angles for all of your projects. They can be bolted directly to our fabrication tables, and parts can be clamped onto multiple sides simultaneously to achieve perfect results, even along multiple axis! This is the most essential tool in a fabricator’s arsenal, and we believe everyone should have at least 4.
10″ Combo Accessory Tool Holder
Because you don’t have time to look for lost tools, we’ve created the Combo Accessory Tool Holder. Our 10″ x 7″ tool holder offers plenty of space for hanging clamps/pliers and comes with a top-shelf with five 5/8″ precision-cut holes for extra tooling.
Welding Table 10″ X 10″ Vise Mount × 1
Our bolt-on vise mount adds a 10″ x 10″ extension that lets you securely mount almost any vise and really leverage it!
Welding Table Accessory Plates – 8″ × 2
Accessory plates allow for the creation of custom fixtures for our welding tables. This package prices two (2) plates to get you started.
Table Risers – 4” x 4” x 8”
We designed our 4″ x 4″ x 8″ Welding Table Riser as the ultimate fixturing tool for your next project. Gain clamping height or add horizontal surface area for your custom projects. Our riser family is made out of 1/4″A572-50 HRPO steel. #Sturdyenoughforyournextproject #Justtherightsize
Special Fab Squares – 20” x 4” x 2”
Our fab squares are laser cut from A572-50 HRPO steel and ship fully assembled. Our 20″ x 4″ fab square is the perfect extension for overhanging materials and for vertical quick clamping! We built this lightweight tool (and priced it) to be accessible to budgets. It can be used along with c-clamps or InsertaClamps to fixture items at a 90-degree angle to the table surface.
So that’s what’s included in our Ultimate Accessory Pack! Tooling is critical, so take your time and find the right package for you. Check out our Starter and Advanced Accessory Packs too.
