What Type of Stops Do You Need?
Stops Overview Video:
“Welding Table Extension – 30″ x 10″(Gen 2)” has been added to your cart. View cart
2.5″ Travel Sliding Stop
$6.00
Made from 1/4″ A36″ steel, this sliding stop is made for ultimate flexibility. With 2.5″ of travel, this stop knows no boundaries. Swivel 360 degrees and adjust for the perfect hold! Our2.5″ Travel Sliding Stop measures 4.2″ x 2″ x 2″ and weighs 0.66 pounds.
| Weight | 1 lbs |
|---|---|
| Dimensions | 4.236 × 2 × 2 in |
| Bottom Diameter | 5/8 in |
| Top Height | 1.5 in |
| Manufacturer Part Number | T54203 |
54 reviews for 2.5″ Travel Sliding Stop
Add a review
Brian (verified owner) –
Dan Winter (verified owner) –
Shane Terrell (verified owner) –
Anonymous (verified owner) –
Kevin Flegler (verified owner) –
Patrick R. (verified owner) –
Excellent cut and bend quality.
Kelly (verified owner) –
These have a sharp edge on them where I’m assuming the laser starts/finishes its cut. This is sharp enough to cut a finger when handling. Will have to grind smooth. Not a big deal.
Mark Z. (verified owner) –
Bill W. (verified owner) –
Scott (verified owner) –
Perry D. (verified owner) –
Anonymous (verified owner) –
Anonymous (verified owner) –
Chris L. (verified owner) –
Awesome great product. I’m very happy with my new welding table and accessories. Texas Metal Works is my new go-to for welding supplies.
John (verified owner) –
David W. Hill (verified owner) –
These are great, but as I noted on the 4″ sliding stops the hole on the end was distorted and I had to ream out. I then had to square up the front side so that it is square.
These are great with the 1/2″ ball pin locks to help set up, be able to move and adjust as a stop and then lock down easily by hand. I had to ream out and square up all 12 of my sliding stops, not 8 as I previously stated. I am slowly filing down the bulge that is created at the crease/bend by the brake. I am doing this so that I have a true flat square plane. Thats just me fine tuning my equipment to my needs.
But I think for the cost and overall order I should not have to ream out all 12 of the 16mm holes.
Jonah (verified owner) –
Greg Quisenberry (verified owner) –
Benjamin Duriex (verified owner) –
Erich (verified owner) –
Jon B. (verified owner) –
Reyes L. (verified owner) –
John L. (verified owner) –
Ben Meir (verified owner) –
Ron peterson (verified owner) –
Kris (verified owner) –
Haven’t used yet to be honest
Kyle (verified owner) –
Justin Richard (verified owner) –
Michael N. (verified owner) –
I have not used them yet but again like everything else well built
Tanner Jenkins (verified owner) –
Mike P. (verified owner) –
Wes W. (verified owner) –
Garrick B. (verified owner) –
Nate B. (verified owner) –
Jason Brown (verified owner) –
Ryan P. (verified owner) –
Perfect for the table!
Cole Kramer (verified owner) –
Kyle W. (verified owner) –
Anonymous (verified owner) –
Anonymous (verified owner) –
Anonymous (verified owner) –
Eric Rodriguez (verified owner) –
Jonathan (verified owner) –
Rodney Jarvis (verified owner) –
doug (verified owner) –
Ron C. (verified owner) –
NICK (verified owner) –
Alfredo Rodriguez (verified owner) –
Geoff (verified owner) –
Dustin Mcwhirter (verified owner) –
Chris F. (verified owner) –
Mark Gerber (verified owner) –
Mike (verified owner) –
Drew K. (verified owner) –