Sale!

Welding Table Starter Accessory Pack

3 reviews

From: $688.07

(*Free Shipping over $899)

A great starter pack with all the basic tools needed to start building your next project!   Inside, you’ll find the following tools: Eight (8) x 6.5” Inserta Clamps, Eight (8) x Table Stops, Four (4) x Side Clamps, Four (4) x Sliding Stop 2.5” Travel, Four (4) x Variable Height Edge Stop, Eight (8) x Magnetic Rest Button, Four (4) x ½” Threaded Adapters, Two (2) x 10” Combo Accessory Tool Holder, and Two (2) x Welding Table Fab Square – 10” x 10” x 4”!

6.5 Inch BuildPro Inserta Clamps

Place the Inserta Clamps into the 5/8″ holes on our table tops for fast, easy clamping. Clamp in the vertical or horizontal position at any height.

$19.20 each

BuildPro Stop

This stop can be used wherever parts need to be positively located for clamping. Press fit shank can be inserted in any 5/8-in holes on our tabletop. We offer the 1.5" tall stop, since it's by far the most popular with our customers.

$4.56 each

BuildPro Side Clamp

Insert into our welding table holes for low profile, light duty, horizontal clamping, locating, and stopping.

$16.32 each

Sliding Stop - 2.5" Travel

Made from 1/4" A36" steel, this sliding stop is made for ultimate flexibility.  With 2.5" of travel, this stop knows no boundaries.  Swivel 360 degrees and adjust for the perfect hold! Our Sliding Stop -3" Travel measures 4.2" x 2" x 2" and weighs 0.66 pounds.

$5.58 each

Variable Height Edge Stop

Our variable height edge stop is designed to mount on the edge of any of our fabrication tables to give you a positive and extremely strong stop to push material against. It also offers two additional holes to accept tooling or to use for creative fixturing!

$16.73 each

Fabrication Table Magnetic Rest Button

Magnets on the bottom of the Magnetic Rest Buttons allow the button to be used at ANY point on the tabletop to elevate workpieces. This part elevates to 0.45 inch.

$4.32 each

10" Combo Accessory Tool Holder

Because you don't have time to look for lost tools, we've created the Combo Accessory Tool Holder.  Our 10" x 7" tool holder offers plenty of space for hanging clamps/pliers and comes with a top-shelf with five 5/8" precision-cut holes for extra tooling like Stops and Side Clamps.

$27.89 each

Welding Table Fab Square - 10" x 10" x 4"

Our fab squares are laser cut from A36 steel and ship fully assembled. They can be bolted to the surface of our fab tables to help fixture things at a 90, or they can even be used on the side of the table as an extension for oversized items!

$111.59 each

Fabrication Table 1/2" Threaded Adapters

Convert any hole in the table into a 1/2"x 13 threaded hole. Place the Adapter in position beneath the tabletop, in alignment with table holes. Magnets hold threaded adapter in place so you can thread bolts right through from the top of the table!

$7.49 each
SKU: AC-TM-ACCSPACK-02-001 Category:
Guaranteed Safe Checkout

What Tools Are Included

The first question people usually ask when purchasing a new weld table for fixturing is, ‘what tools do I need’? So we’ve assembled three optional packages to ensure you have a range of useful tools that will help with just about any project you need to tackle. Check out our Starter, Advanced, and Pro Accessory Packs.

We’ve assembled everything you need to get started fixturing on a new welding table, including clamps for holding down, stops for alignment on the table, and right angles to make sure things are straight (and we’ve discounted the overall kit). And, for those of you ready to tackle more, we’ve got you covered too!

What You Get!

Standard Package

  • Eight (8) x 6.5” Inserta Clamps
  • Eight (8) x Table Stops
  • Four (4) x Side Clamps
  • Four (4) x Sliding Stop 2.5” Travel
  • Four (4) x Variable Height Edge Stop
  • Eight (8) x Magnetic Rest Button
  • Four (4) x ½” Threaded Adapters
  • Two (2) x 10” Combo Accessory Tool Holder
  • Two (2) x Welding Table Fab Square – 10” x 10” x 4”

Why You Get It!

6.5″ InsertaClamps

We consider the InsertaClamps to be the single most important accessory for our fabrication tables. These clamps can drop in any hole on our table or any of the other fixtures, and quickly clamp down with hundreds of pounds of holding force.

We include 8 in our standard kit because if you wanted to do something like fixture a square tubing frame you’ll need two of these clamps per side to hold it in place.

Stops and Side Clamps

It’s one thing to be able to clamp things downward to the table, but it’s another thing to be able to position things accurately and clamp them sideways. This is where the stops and side clamps come in. So let’s say you want to build a frame that’s almost as big as your table surface. You can use the side stops to push your material right up to the edge.

Meanwhile, on the other side you need to be able to push things together firmly to keep it in place, so that’s where the Side Clamps come in.

Sometimes your materials don’t fit conveniently between our precision holes and other stops just don’t work. Enter our Sliding Stops. Position them where you need ’em and they will hold!

1/2″ Threaded Adapters

Convert any hole in the table into a 1/2″x 13 threaded hole. Place the Adapter in position beneath the tabletop, in alignment with the table holes. Magnets hold threaded adapter in place so you can thread bolts right through from the top of the table!

Magnetic Rest Buttons

The magnetic rest buttons do two very critical things:

  1. They raise your work piece up by about a half inch (or more if you stack them), allowing you to actually fully weld seams all the way down without risking welding your project to the table!
  2. They allow for some critical space for weld BB’s to cool down before hitting the table surface, which prevents a lot of them from sticking.

For even more protection for your table top we recommend spraying Anti-Spatter directly on the table surface before welding over it! Between that and the rest buttons virtually nothing will stick to your beautiful table!

10″ Combo Accessory Tool Holder

Because you don’t have time to look for lost tools, we’ve created the Combo Accessory Tool Holder.  Our 10″ x 7″ tool holder offers plenty of space for hanging clamps/pliers and comes with a top-shelf with five 5/8″ precision-cut holes for extra tooling.

Welding Table Fab Squares

The 10″ Fab Squares do exactly what you would expect them too. Allow you to fixture upwards at a perfect 90 degree angle, meaning you can reliably and consistently fixture in three dimensions!

So that’s what’s included in our Starter Accessory Pack! We think these tools are the most critical for anyone just getting a professional fixture table.

3 reviews for Welding Table Starter Accessory Pack

5.0
Based on 3 reviews
5 star
100
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
1-3 of 3 reviews
  1. (0) (0)
  2. (0) (0)
  3. (0) (0)
Add a review
You must be logged in to post a review Log In
Weight 50 lbs
Dimensions 18 × 18 × 12 in

BuildPro Stop

Top Diameter

1 in

Bottom Diameter

5/8 in

Top Height

1.5 in

Manufacturer Part Number

T54203

BuildPro Side Clamp

Stroke

1.5 in

Manufacturer Part Number

TCX5210

Sliding Stop - 2.5" Travel

Bottom Diameter

5/8 in

Top Height

1.5 in

Manufacturer Part Number

T54203

Variable Height Edge Stop

Pack Size

1, 4, 8

Fabrication Table Magnetic Rest Button

Diameter

1.5 in

Height

0.45 in

Manufacturer Part Number

T50737

10" Combo Accessory Tool Holder

Package Options

1 Pack, 2 Pack, 4 Pack

Fabrication Table 1/2" Threaded Adapters

Hole Adapters

2

Threaded Holes

1/2 – 13

Magnets

1

Manufacturer Part Number

TXT5205

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information:

1
    1
    Your Cart