Sale!

Welding Table Starter Accessory Pack (Gen 2)

From: Original price was: $819.12.Current price is: $774.47.

(*Free Shipping over $899)

A great starter pack with all the basic tools needed to start building your next project!   Inside, you’ll find the following tools: Eight (8) x Clamps w/ T-Handles, Eight (8) x Table Stops, Four (4) x Side Clamps, Four (4) x Sliding Stop 2.5” Travel, Four (4) x Variable Height Edge Stop, Eight (8) x Magnetic Rest Button, Four (4) x ½” Threaded Adapters, Two (2) x 10” Combo Accessory Tool Holder, and Two (2) x Welding Table Fab Square – 10” x 10” x 4”!  Recommended Add-ons:  1/2″ Ball Lock Options (for 1/4″ table tops), 5/8″ Ball Lock Options (for 3/8″ table tops), Adjustable Ball Lock Pins (for 1/4″ to 1 3/4″ materials) and Magnetic Locknut Pin (for everyone).  

Clamp w/ T Handle

For fast clamping, check out our T Handle Clamp or Ratchet Handle. Perfect for both vertical or horizontal clamping, our oversized clamp with T-handle can tackle any job! Measuring: 120x300x16mm.

Original price was: $29.00.Current price is: $27.84. each

Stop Pin

Secure parts in place with this handy tool. Press fit shank can be inserted in any 5/8-in holes on our tabletop.Measuring: 50x20mmx15.9mm.

Original price was: $7.00.Current price is: $6.72. each

Side Clamp

Insert into our welding table holes for low profile, light duty, horizontal clamping, locating, and stopping.

Original price was: $17.00.Current price is: $16.32. each

Sliding Stop - 2.5" Travel

Made from 1/4" A36" steel, this sliding stop is made for ultimate flexibility.  With 2.5" of travel, this stop knows no boundaries.  Swivel 360 degrees and adjust for the perfect hold! Our Sliding Stop -3" Travel measures 4.2" x 2" x 2" and weighs 0.66 pounds.

Original price was: $6.00.Current price is: $5.58. each

Variable Height Edge Stop

Our variable height edge stop is designed to mount on the edge of any of our fabrication tables to give you a positive and extremely strong stop to push material against. It also offers two additional holes to accept tooling or to use for creative fixturing!

Original price was: $17.99.Current price is: $16.73. each

Fabrication Table Magnetic Rest Button

Magnets on the bottom of the Magnetic Rest Buttons allow the button to be used at ANY point on the tabletop to elevate workpieces. This part elevates to 0.45 inch.

Original price was: $4.50.Current price is: $4.32. each

Fabrication Table 1/2" Threaded Adapters

Convert any hole in the table into a 1/2"x 13 threaded hole. Place the Adapter in position beneath the tabletop, in alignment with table holes. Magnets hold threaded adapter in place so you can thread bolts right through from the top of the table!

Original price was: $7.80.Current price is: $7.49. each

10" Combo Accessory Tool Holder

Because you don't have time to look for lost tools, we've created the Combo Accessory Tool Holder.  Our 10" x 7" tool holder offers plenty of space for hanging clamps/pliers and comes with a top-shelf with five 5/8" precision-cut holes for extra tooling like Stops and Side Clamps.

Original price was: $29.99.Current price is: $27.89. each

Welding Table Fab Square - 10" x 10" x 4"

Our fab squares are laser cut from A36 steel and ship fully assembled. They can be bolted to the surface of our fab tables to help fixture things at a 90, or they can even be used on the side of the table as an extension for oversized items!

Original price was: $119.99.Current price is: $111.59. each

Ball Lock Pin (1/2")

Finally a Ball Lock Pin for 1/4" tables! Save time and effort with this quick-locking fastener. Simply drop in any 16mm (5/8") hole and tighten. No more reaching under the table to thread a bolt! Time-saving Ball Lock Pin secures fixtures, tooling, and more. Measuring: 5/8"-1/2"(16x12.7mm) with Xmm stud height.

Ball Lock Pin (5/8")

Finally a Ball Lock Pin for 3/8" tables! Save time and effort with this quick-locking fastener. Simply drop in any 16mm (5/8") hole and tighten. No more reaching under the table to thread a bolt! Time-saving Ball Lock Pin secures fixtures, tooling, and more. Measuring: 5/8"-5/8"(16x16mm).

Adjustable Ball Lock Pin

Perfect for 1/4" to 1.5" table tops.  This Adjustable Ball Lock Pin can clamp up to 1.8" of material -- the bigger question is what can't you use this for?  Save time and effort with this quick-locking adjustable fastener. Simply drop in any 16mm (5/8") hole, adjust and tighten. No more reaching under the table to thread a bolt! Time-saving Ball Lock Pin secures fixtures, tooling, and more. Measuring: 5/8"(16mm) x12-45mm.

Magnetic Locknut Pin

Measuring: 32.5x12.50x16mm.

SKU: AC-TM-ACCSPACK-STR Category:
Guaranteed Safe Checkout

What Tools Are Included

The first question people usually ask when purchasing a new weld table for fixturing is, ‘What tools do I need?’ So, we’ve assembled three optional packages to ensure you have a range of useful tools to help with any project you need to tackle. Check out our new Starter, Advanced, and Pro Accessory Packs.

We’ve assembled everything you need to get started fixturing on a new welding table, including clamps for holding down, stops for alignment on the table, and right angles to make sure things are straight (and we’ve discounted the overall kit). And, for those of you ready to tackle more, we’ve got you covered too!

What You Get!

Standard Package

  • Eight (8) x Clamps w/ T-Handles
  • Eight (8) x Table Stops
  • Four (4) x Side Clamps
  • Four (4) x Sliding Stop 2.5” Travel
  • Four (4) x Variable Height Edge Stop
  • Eight (8) x Magnetic Rest Button
  • Four (4) x ½” Threaded Adapters
  • Two (2) x 10” Combo Accessory Tool Holder
  • Two (2) x Welding Table Fab Square – 10” x 10” x 4”
  • Recommended Add-ons:
    • Ball Lock Pin (1/2″) – for 1/4″ table tops; order as many as you need
    • Ball Lock Pin (5/8″) – for 3/8″ table tops; order as many as you need
    • Adjustable Ball Lock Pin – for 1/4″ to 1.5″ table tops; order as many as you need
    • Magnetic Locknut Pin – for use with anything!!!

Why You Get It!

Clamps w/ T-Handles

We consider our Clamps with T-handles the single most important accessory for our fabrication tables. These clamps can drop in any hole on our table or other fixtures and quickly clamp down with hundreds of pounds of holding force.

We include twenty (20) Clamps w/T-handles in our Pro kit because your projects call for an arsenal of clamps!

We include 8 in our standard kit because if you wanted to do something like fixture a square tubing frame you’ll need two of these clamps per side to hold it in place.

Stops and Side Clamps

It’s one thing to be able to clamp things downward to the table, but it’s another thing to be able to position things accurately and clamp them sideways. This is where the stops and side clamps come in. So let’s say you want to build a frame that’s almost as big as your table surface. You can use the side stops to push your material right up to the edge.

So let’s say you want to build a frame that’s almost as big as your table surface. You can use the Variable Height Stops to push your material right up to the edge.

Meanwhile, on the other side you need to be able to push things together firmly to keep it in place, so that’s where the Side Clamps come in.

Sometimes your materials don’t fit conveniently between our precision holes and other stops just don’t work. Enter our Sliding Stops. Position them where you need ’em and they will hold!

1/2″ Threaded Adapters

Convert any hole in the table into a 1/2″x 13 threaded hole. Place the Adapter in position beneath the tabletop, in alignment with the table holes. Magnets hold threaded adapter in place so you can thread bolts right through from the top of the table!

Magnetic Rest Buttons

The magnetic rest buttons do two very critical things:

  1. They raise your work piece up by about a half inch (or more if you stack them), allowing you to actually fully weld seams all the way down without risking welding your project to the table!
  2. They allow for some critical space for weld BB’s to cool down before hitting the table surface, which prevents a lot of them from sticking.

For even more protection for your table top we recommend spraying Anti-Spatter directly on the table surface before welding over it! Between that and the rest buttons virtually nothing will stick to your beautiful table!

10″ Combo Accessory Tool Holder

Because you don’t have time to look for lost tools, we’ve created the Combo Accessory Tool Holder.  Our 10″ x 7″ tool holder offers plenty of space for hanging clamps/pliers and comes with a top-shelf with five 5/8″ precision-cut holes for extra tooling.

Welding Table Fab Squares

The 10″ Fab Squares do exactly what you would expect them too. Allow you to fixture upwards at a perfect 90 degree angle, meaning you can reliably and consistently fixture in three dimensions!

Optional Ball Lock & Pinning Tools (Optional)

Save time and effort with this quick-locking fastener. What does it do? Simply drop in any 16mm (5/8″) hole and tighten. No more reaching under the table to thread a bolt!  Each alignment pin has a positive locking mechanism that, when turned, releases a three-ball lock to hold material in place.

Ball Lock Options
Ball Lock Options: For 1/4″ and 3/8″ tables + adjustable for any use case!

Ball Lock Pin (1/2″) – for 1/4″ table tops only! (Optional)

For 1/4″ table tops only! Save time and energy securing fixtures directly to your table with the help of these handy tools.

Ball Lock Pin (5/8″) – for 3/8″ table tops only! (Optional)

For 3/8″ table tops only! Quicky lock in your fixtures with this handle tough-as-nails tools! A must for fastening to the table!

Adjustable Ball Lock Pin – for 1/4″ to 1.5″ table tops (Optional)

For any table thickness, these adjustable ball locks provide flexibility to secure any fixture through our standard 16mm hole. To secure up to 1.5″ of material, simply dial in the adjustable base and lock the unit in place.

Magnetic Locknut Pin (Optional)

For quick placement and pinning of material to the table, these magnetic pins

So that’s what’s included in our Starter Accessory Pack! We think these tools are the most critical for anyone just getting a professional fixture table.

Reviews

There are no reviews yet

Add a review
You must be logged in to post a review Log In
Weight 50 lbs
Dimensions 18 × 18 × 12 in

Side Clamp

Stroke

1.5 in

Manufacturer Part Number

TCX5210

Sliding Stop - 2.5" Travel

Bottom Diameter

5/8 in

Top Height

1.5 in

Manufacturer Part Number

T54203

Variable Height Edge Stop

Pack Size

1, 4, 8

Fabrication Table Magnetic Rest Button

Diameter

1.5 in

Height

0.45 in

Manufacturer Part Number

T50737

Fabrication Table 1/2" Threaded Adapters

Hole Adapters

2

Threaded Holes

1/2 – 13

Magnets

1

Manufacturer Part Number

TXT5205

10" Combo Accessory Tool Holder

Package Options

1 Pack, 2 Pack, 4 Pack

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information:

0
    0
    Your Cart
    Your cart is emptyReturn to Shop