We’ve assembled everything you need to get started fixturing on a new welding table, including clamps for holding down, stops for alignment on the table, and right angles to make sure things are straight (and we’ve discounted the overall kit). And, for those of you ready to tackle more, we’ve got you covered too!
What You Get! Standard Package
Eight (8) x Clamps w/ T-Handles
Eight (8) x Table Stops
Four (4) x Side Clamps
Eight (8) x Sliding Stop 2.5” Travel
Eight (8) x Magnetic Rest Button
Four (4) x ½” Threaded Adapters
One (1) x Welding Table Super Slot Tool Holder
Two (2) x Welding Table Fab Square – 10” x 10” x 4” Why You Get It! Clamps w/ T-Handles We consider our Clamps with T-handles the single most important accessory for our fabrication tables. These clamps can drop in any hole on our table or other fixtures and quickly clamp down with hundreds of pounds of holding force.
We include twenty (8) Clamps w/T-handles in our kit because your projects call for an arsenal of clamps!
We include 8 in our standard kit because if you wanted to do something like fixture a square tubing frame you’ll need two of these clamps per side to hold it in place.
Stops and Side Clamps It’s one thing to be able to clamp things downward to the table, but it’s another thing to be able to position things accurately and clamp them sideways. This is where the stops and side clamps come in. So let’s say you want to build a frame that’s almost as big as your table surface. You can use the side stops to push your material right up to the edge.
Meanwhile, on the other side you need to be able to push things together firmly to keep it in place, so that’s where the Side Clamps come in.
Sometimes your materials don’t fit conveniently between our precision holes and other stops just don’t work. Enter our Sliding Stops. Position them where you need ’em and they will hold!
Convert any hole in the table into a 1/2″x 13 threaded hole. Place the Adapter in position beneath the tabletop, in alignment with the table holes. Magnets hold threaded adapter in place so you can thread bolts right through from the top of the table!
The magnetic rest buttons do two very critical things:
They raise your work piece up by about a half inch (or more if you stack them), allowing you to actually fully weld seams all the way down without risking welding your project to the table!
They allow for some critical space for weld BB’s to cool down before hitting the table surface, which prevents a lot of them from sticking. For even more protection for your table top we recommend spraying Anti-Spatter directly on the table surface before welding over it! Between that and the rest buttons virtually nothing will stick to your beautiful table!
Because you don’t have time to look for lost tools, we’ve created the Combo Accessory Tool Holder which offers plenty of space for hanging clamps/pliers and includes super slots for hanging bins.
Welding Table Fab Squares The 10″ Fab Squares do exactly what you would expect them too. Allow you to fixture upwards at a perfect 90 degree angle, meaning you can reliably and consistently fixture in three dimensions!