Tools
- Sorry, this product cannot be purchased.
Showing all 26 results
-
Welding Table Extension – 60″ x 20″ (Gen 2)
$696.99Rated 5.00 out of 5Add to cartAdd even more welding table surface area with our larger 60″ x 20″ table extension. Double them up and transform our 60″ x 100″ into a 60″ x 140″ or supersize our 60″ x 120″ into a 60″ x 160″.
-
Welding Table Extension – 50″ x 20″
$589.99Rated 0 out of 5Add to cartAdd even more welding table surface area with our larger 50″ x 20″ table extension. Double them up and transform our 50″ x 50″ into a 50″ x 90″ or supersize our 50″ x 100″ into a 50″ x 140″.
-
Welding Table Extension – 40″ x 20″
$495.99Rated 5.00 out of 5Add to cartAdd even more welding table surface area with our larger 40″ x 20″ table extension. Double them up and transform our 40″ x 40″ into a 40″ x 80″ or supersize our 40″ x 80″ into a 40″ x 120″.
-
Welding Table Extension – 30″ x 20″
$464.99Rated 0 out of 5Add to cartExpand your welding table surface area by adding our 30″ x 20″ table extension to our 30″ x 40″, 30″ x 60″ or 60″ x 120″ welding tables.
Add even more welding table surface area with our larger 30″ x 20″ table extension. Double them up and transform our 30″ x 40″ into a 30″ x 80″ or supersize our 30″ x 60″ into a 30″ x 100″. For our largest 60″ x 120″ table, these extensions create a 60″ x 160″ giant!
-
Welding Table Extension – 60″ x 10″(Gen 2)
$459.99Rated 0 out of 5Add to cartExpand your welding table surface area by adding our 60″ x 10″ table extension to our 30″ x 60″, 60″ x 60″, 60″ x 100″, and 60″ x 120″ welding tables.
-
Welding Table Extension – 50″ x 10″(Gen 2)
$379.99Rated 5.00 out of 5Add to cartExpand your welding table surface area by adding our 50″ x 10″ table extension to our 50″ x 50″ and 50″ x 100″ welding tables
-
Welding Table Extension – 30″ Corner (Gen 2)
$349.00Rated 0 out of 5Add to cartExpand your welding table surface area with this 30″ wrap-around corner extension.
-
Welding Table Extension – 40″ x 10″(Gen 2)
$319.99Rated 5.00 out of 5Add to cartExpand your welding table surface area by adding our 40″ x 10″ table extension to our 40″ x 40″ and 40″ x 80″ welding tables
-
Welding Table Extension – 30″ x 10″(Gen 2)
$299.99Rated 5.00 out of 5Add to cartExpand your welding table surface area by adding our 30″ x 10″ table extension to our 30″ x 40″, 30″ x 60″ or 60″ x 120″ welding tables
-
Welding Table Extension – 20″ Corner (Gen 2)
$299.00Rated 0 out of 5Add to cartExpand your welding table surface area with this 20″ wrap-around corner extension.
-
Welding Table Extension – 20″ x 10″(Gen 2)
$269.99Rated 0 out of 5Add to cartExpand your welding table surface area by adding our 20″ x 10″ table extension to any of our tables.
-
Welding Table Extension – 50″ x 10″
$225.00Rated 0 out of 5Add to cartExpand your welding table surface area by adding our 50″ x 10″ table extension to our 50″ x 50″ and 50″ x 100″ welding tables
-
Welding Table Extension – 20″ x 10″
$219.99Rated 0 out of 5Add to cartExpand your welding table surface area by adding our 20″ x 10″ table extension to any of our tables.
-
Welding Table Extension – 40″ x 10″
$269.99$175.00Rated 0 out of 5Read moreExpand your welding table surface area by adding our 40″ x 10″ table extension to our 40″ x 40″ and 40″ x 80″ welding tables
-
BuildPro Inserta Pliers – 4″ Opening
$22.00Rated 5.00 out of 5Add to cartInsert these pliers into any hole on our tabletops for fast clamping. The rear crank handle allows pressure adjustment while the clamp is in locked position.
-
BuildPro Side Clamp
$17.00Rated 4.88 out of 5Add to cartInsert into our welding table holes for low profile, light duty, horizontal clamping, locating, and stopping.
-
Welding Fab Table V – Block
$15.50Rated 5.00 out of 5Add to cartIf you’re working with round tubing or other curved materials, V-Blocks will help facilitate clamping them directly to our fabrication tables for welding and fixturing. The “V” shape allows you to drop in tubing within a range of diameters, and then clamp down with tools like our Inserta Clamps.
-
Super Slot Grinder Hanger
$15.00Rated 4.88 out of 5Add to cartOur Super Slot Grinder Hanger adds storage to our 2nd generation tables and our Super Slot Panels.
-
Sliding Stop – 6″ Travel
$10.00Rated 5.00 out of 5Add to cartMade from 1/4″ A36″ steel, this sliding stop is made for ultimate flexibility. With 6″ of travel, this stop knows no boundaries. Swivel 360 degrees and adjust for the perfect hold! Our Sliding Stop -6″ Travel measures 7.7″ x 2″ x 2″ and weighs 1 pound.
-
Welding Fab Table V – Pad (for 8.5″ Inserta Clamps)
$8.90Rated 5.00 out of 5Add to cartFor Use With 8.5″ Inserta Clamps Only: If you’re working with round tubing or other curved materials, V-Blocks will help facilitate clamping them directly to our fabrication tables for welding and fixturing. The “V” shape allows you to drop in tubing within a range of diameters, and then clamp down with tools like our Inserta Clamps.
-
Welding Fab Table V – Pad (for 6.5″ Inserta Clamps)
$8.90Rated 5.00 out of 5Add to cartFor Use With 6.5″ Inserta Clamps Only: If you’re working with round tubing or other curved materials, V-Blocks will help facilitate clamping them directly to our fabrication tables for welding and fixturing. The “V” shape allows you to drop in tubing within a range of diameters, and then clamp down with tools like our Inserta Clamps.
-
Sliding Stop – 4″ Travel
$8.00Rated 5.00 out of 5Add to cartMade from 1/4″ A36″ steel, this sliding stop is made for ultimate flexibility. With 4″ of travel, this stop knows no boundaries. Swivel 360 degrees and adjust for the perfect hold! Our Sliding Stop -4″ Travel measures 5.7″ x 2″ x 2″ and weighs 0.81 pounds.
-
Fabrication Table 1/2″ Threaded Adapters
$7.80Rated 5.00 out of 5Add to cartConvert any hole in the table into a 1/2″x 13 threaded hole. Place the Adapter in position beneath the tabletop, in alignment with table holes. Magnets hold threaded adapter in place so you can thread bolts right through from the top of the table!
-
Sliding Stop – 2.5″ Travel
$6.00Rated 4.89 out of 5Add to cartMade from 1/4″ A36″ steel, this sliding stop is made for ultimate flexibility. With 2.5″ of travel, this stop knows no boundaries. Swivel 360 degrees and adjust for the perfect hold! Our Sliding Stop -3″ Travel measures 4.2″ x 2″ x 2″ and weighs 0.66 pounds.
-
BuildPro Stop
$4.75Rated 5.00 out of 5Add to cartThis stop can be used wherever parts need to be positively located for clamping. Press fit shank can be inserted in any 5/8-in holes on our tabletop. We offer the 1.5″ tall stop, since it’s by far the most popular with our customers.
-
Fabrication Table Magnetic Rest Button
$4.50Rated 5.00 out of 5Add to cartMagnets on the bottom of the Magnetic Rest Buttons allow the button to be used at ANY point on the tabletop to elevate workpieces. This part elevates to 0.45 inch.